Create An Inspiring Wine Bottle Garden Fountain

Have you ever known anyone that collects wine bottles? While there are many beautifully shaped and colorful wine bottles, there does not seem to be many uses for them once the alcohol is consumed. People have been known to use the wine bottles as candle holders; the candle wax melting down the sides of the bottles make for a very unique indoor decoration. Often people just collect the bottles and add them to their shelves. In this case the bottles are more like dust collectors.
One great idea for empty wine bottles is to use them to create an outdoor garden fountain. Not only will you be creating an uplifting and almost spiritual design, but also you will be helping Mother Earth by recycling what otherwise would be a dumpster contribution. For more information on garden fountains visit http://www.garden-fountains.com/garden-info/water-and-fountains-1.html.
The Basics
In order to create a wine bottle garden fountain you must first decide on where you want to dig the hole that will accommodate a minimum of 18 bottles, a spray fountainhead, water pump, a sump, rocks, bricks and some pavers. All of your materials are going to be submerged.
The wine bottles will be turned upside down so that the bottoms are at the top. You want to find traditional wine bottles in a variety of colors, as their bottoms are concave. The dipped bottoms catch the water as it sprays from the fountainhead and create magical, tiny, colorful pools. The reflection from the tiny pools that this creates in the sunlight is spectacular and inspiring.
Your water fountain will be circular as the bottles dictate an automatic circle design when put together. Start with a six-bottle core and then each ring after that will double your need for wine bottles (i.e.: six for the core, 12 for the second ring and if you desire a larger garden fountain you will need 24 bottles for the third ring). The first six bottles will be strapped around the rainwater pipe held together with waterproof tape. Be careful when handling the bottles, as the sheer weight of them will make them difficult to carry. Use goggles or protective eyewear when working with glass. For other water fountain ideas and inspirations go to http://www.garden-fountains.com/fountain-selection-guide-visual.html.
Basically, you want to cover the hole with plastic sheeting to ensure proper drainage. You will then fill the plastic lined hole with bricks to hold the bottles in place, the submersible water pump, armored piping to channel the wiring under the lawn or pavers and small cobblestones and gravel to arrange around the bottles, serving as more support. The spray nozzle fountainhead will obviously rise above in the center. After you arrange some larger, decorative rocks atop the fountain to hide all the hardware, you will finally add the pavers to hold everything in place and hide the plastic sheeting.
You will want to consult with a home and garden center expert if you have any questions about the specifics on setting up your wine bottle garden fountain. You may also do some research online for specific instructions as well as thumb through any fountain project literature.
Delightful Sight
Indeed, the combination of colorful wine bottles, decorative, smooth, river rock and cement pavers is a magical sight. Wine bottle garden water fountains lend themselves well to many different themed gardens. It is a definitely conversational piece as you can talk about how you were able to collect each wine bottle and how you are proud of your recycling efforts. Wine bottle spray water fountains are beautiful and eco-friendly. For another water fountain idea check out http://www.garden-fountains.com/Detail.bok?no=1075.